What kind of Test Need to Do on Light Truck Brake linings Before Leaving Factory?
Check on the view, size, performance and logo. The visual inspection mainly depends on whether it is different. Whether the material density, the edge, the corner of the lining surface, and the material density of the center are one, Whether the adhesive glue overflows or not; the size inspection mainly focuses on the adhesion of the lining and the shoe, Whether there is offset, whether the rotation of the tie rod and the solder joint of the shoe are related to the thickness of the product
Degree, in general, the thickness of the product of the manufacturer is thinner than the standard thickness.
Avoid being installed, but if it is too thin, it will reduce costs and shorten the service life.
Suspect; performance testing is mainly based on GB5763 test and inspection report
In addition, we must pay special attention to the product bond strength test data and product pull rods.
Live, spring return is smooth.
