- All
- Brake Pads Foundations
- Brake Pads Materials
- Brake Pads Production
- Brake Pads Choose
- Brake Pads Usage
- Brake Pads Common Problems
-
Q: What Is The Reason There Are Noise When Install a Brake Pad On New Brake Discs-No.1?A: The reason may be that the repairer has biased the brake pads and re-detached them. To see that the surface of the brake pad is only partially scratched. P...
-
Q: Why It Makes Noise After Install A New Brake Pads?A: At present, according to the actual situation, the probability of the original brake pad scratching the original brake disc More than 50%, but because it i...
-
Q: Can We Identigy the Brake Pads Quality by Its Smells?A: I see this phenomenon every day, when the user chooses the brake pads, some people, I will smell the brake pads under the nose and judge the quality of the...
-
Q: What Should I Pay Attention To After Washing Car In Winter?A: When the temperature is below 10 °C, start and release the hand after washing the car outside. Brake, there will be a car that does not move, step on t...
-
Q: What Is The Meaning When The ESP Lighting?A: The signal light is on to reflect the operation of the components on the car, for example, when the car Excessive turn, too fast turning speed, the ESP sys...
-
Q: What Is The Reason For Feeling Hard When Braking?A: It is a common phenomenon that the brakes become harder than the brakes become soft. This is Because the brake assist system is mostly vacuum boost, when t...
-
Q: What Is Feeling Soft When Step On Brakes?A: There are many owners who reflect why my car feels a little soft on the brakes? simple Just saying that you can brake before you step on the foot, you need...
-
Q: Why Does The Pedal Return To The Top When The Brakes Are Applied?A: In this case, many car owners also have experience, especially when driving fast brakes. I feel that the brake pedal has a phenomenon of returning to the t...
-
Q: Why The Brake Pads Can't Stop The Car?A: There are more and more incidents of brakes in cars, and it is reported that Industry personnel surveys have shown that accidents with poor brakes are main...
-
Q: Why The Brake Pedal Return Back When Step Brakes?A: The brake pedal has a rebounding foot when the brake is pressed. This is the case. Vehicles are often encountered, the reasons for this phenomenon are: the...
-
Q: How To Check it By Self When Feeling The Brake Pads Become Soft?A: The phenomenon that the brakes become soft is very common, and many owners reflect that their cars have This phenomenon may be caused by insufficient brake...
-
Q: Why There Are Smokes When Braking?A: The reason for smoking during braking is that the brake pad is made of resin and rubber powder. Organic matter, when the temperature is too high, it will d...
-
Q: Why There Is A Brake Delay?A: The causes of brake drag are: brake spring return failure; brake pads and brakes The disc is not properly installed or the assembly size is too tight; when...
-
Q: Why It Can Not Work After Install A New Brake Pads?A: The reason for replacing the new brake pads but not stopping the car is that the brakes are not installed. Requirements; the surface of the brake pad is co...
-
Q: Why Brake Pads Becomes Have Steps?A: The step on the brake pads is mainly due to the matching of the brake disc and the brake pads. When braking, there will be brake squeal and brake pedal jit...
-
Q: Why The Brake Pads Have Whitish and Dregs On Brake Pads Sides?A: The slag on the edge of the brake pad may be bad for the brake cylinder, and the brake pad is long. Period of dragging, parking system failure, excessive b...
-
Q: Why Brake Pads Crack On Surface?A: The reason for the crack on the surface of the brake pad is mainly during the installation of the brake pad. The method is not suitable, the brake pads cau...
-
Q: Why There Are Hard Areas On Brake Pads Surface?A: The reason for the hard surface is mainly due to uneven mixing during the brake pad manufacturing process. Evenly, or the raw materials used are relatively...
-
Q: Why There Are Oils on Brake Pads Surface?A: Surface oil due to improper operation of the brake pads or during installation Stain, the effect is: the brake pedal is long, the brake is soft, and the br...
-
Q: Why The Brake Pads Have Gullys and Uneveness Surface?A: The reasons for the gully or unevenness of the brake pads are as follows: the original brake disc has been Gully or uneven; if this happens after the new b...
