The fun of driving in metropolises is that, start-up slowly, braking timerly, with loosing and pedaling, arriving at the destinations on time with no hurry. The roads are familiar, but they are also lengthy. Therefore, with inner peace and comfort, braking distance is within your control. It is not hurried or rushed. The moment you step on the pedal, your heart relaxes with the music, again and again. The Passionate Red(orange) series brake pads provided by Bull Brakes are designed for South America Market, for urban driving, comfortable and secure, quiet and environmentally friendly, everything is just right.
HYBRID FRICTION COMPOUNDING TECHNOLOGY
Friction Hybrid Compounding Technology
Merging with Bull Brakes’ the most leading Friction Hybrid Compounding Technology to creat new friction fomulation. Each intergated formula are formulated at a moleculare level to determine the formula structure.
Postive Molding Technology
Using the most advanced one-step molding process to suppress; Accurate weighing and feeding, applying with Bull Brakes’ the most leading Friction Hybrid Compounding Technology, each piece is just right.
NAO Mineral Fibers and Whiskers
Non-Asbestos Organic(NAO) Formula uses a variety of mineral fibers and whiskers, such as calcium sulfate whisker, to replace the metal fibers. They are not only to reduce the formula density, but also are easy to mix, disperse and capture the fine powder to keep the entire mixture fully mixed and evenly distributed, creating a very suitable condition for stabilizing the friction coefficient. Most important, they are environment friendly.
Al-based Friction perfomance Modifiers
Al-based(SiO2+Al2O3) friction modifiers are added in proportion to make the brake pads more wear-resistant, less likely to fall off dust and less likely to produce noise. The most important thing is to greatly extend the service life of the brake pads, to ensure that the sports cars will brake effectively for a longer time.
PREMIER FRICTION SURFACE PROCESSING TECHNOLOGY
1. Variety of groove(slotting) designs according to different models of brake pads: Single Straight, Single Slant, Double Straight, Double Slant, Single Eccentric;
2. Groove design is conducive to ventilation and heat dissipation, effectively reducing brake fade from high temp.;
3. During braking, groove can also increase the drainage andsewage capacity, keep the brake pads and brake discs clean.
4. Friction dust can be discharged through the groove, thereby reducing the brake noise and mating parts damage, prolonging the service life of brake discs and brake pads
5. Good groove is a warning line. Visually check is simple and safe.
1.Variety of chamfer designs according to different models of brake pads: Parallel Segment, Anti-segment, Parallel J-scoop, Radial J-scoop;
2. Specific angles of chamfering design can increase heat dissipation area during the braking, thus to remove waste heat during the braking much faster, and reduce brake fade.
3.Suitable chamfering design can reduce the contact area between the brake pads and the brake disc, thereby reducing the damage of the mating parts during the running-in period.
1. Blue is cool and silent, Blue stripe make you feel more comfort;
2. Blue strip is a unique formulated rubber strip, it is a design for instant friction during the brake-in time
3. Positive pedal feeling, straight out of the box without bedding-in.
4. Suitbale for many different kinds of brake discs(rotors).
SIGNIFICANT SPRAYING GLUING TECHNOLOGY
1. Advanced spraying technology with high-quality compouding glue;
2. Glue is evenly and effectively dispersed on the friction surface of the steel back, with the thickness of the glue from 0.1mm-0.2mm;
3. Glue will cover the full surface of backing plates, greatly improving the bonding strength between the friction material and the steel back.
4. Shear Force shall be up to15KN to 20KN.
SUPERIOR BACKING PLATES CRAFTSMANSHIP
1. Using high-quality Q235B carbon steel, with high yield points at 235MPa, no possible to bend during the braking.
2. Thickness is uniform, flatness is controlled within 0.1-0.2mm;
3. Quality is stable and consistent
4. Molds are manufactured according to the FMSI standard drawings;
5.Strictly produced, accurate size to match for the OE brake capilers and brake discs;
6. Perfectly fit in the caliper, thus reduce the noise caused by friction with the caliper accessories during braking.
MARVELOUS POWDER COATING TECHNOLOGY
1. Applying the most advanced electrostatic spraying process, suface of brake pads will be fully covered by the atomized powder coating, no area will be missed;
2. Atomized powder coating is evenly and effectively dispersed on backing plates,
3. Effectively prevent the steel back from contacting with oxygen, thereby oxidizing.
4. Extending the service life of brake pads;
OUTSTANDING BRAKE SHIMS DAMPING SOLUTION
UAI noise absorbinbg shims are designed to effectively prevent the transmission of vibration and noise from the brake pads by reducing the effect of the dynamic forces generated during braking, enhance the confort of braking experience.
UAI damping solution is a overall NHV solution for brake pads, providing different surface finishes and colors. Shims can be buckles clamp-on design or full adhesive coverage design.We design for silence braking.
