Reasonable and scientific modified vehicles can make the original vehicle safer and perform better. As a key component, brake pads directly affect the driving and braking safety performance. The brake pads of Bull Brakes use URT(UAI Mechanical Retention Technology) solution with galvanized finishing, which means that the braking force of the brakes is stronger, and there is no possibility of drop off, and longer service life, protecting your life all the time.
Traditional Brake Pad Backing Plates With Gluing
| Not Enough Bonding Power Between Back Plates and Friction Materials | Easy to Cause Cracking on Brake Pads |
| Hard to Control the Thickness of Glue | Not Enough Shear Strengh For High-End Cars |
| The Quality of Glue is Uncontrollable | Lower Safety Guarantee |
| Not Stable Gluing Performance With Painting | Unstable Braking Performance During Driving |
| Not Enough High Temperature Resistance | Short Working Life for Brake Pads |
Advantages of Hook Brake Pads Backing Plates
| Higher Bonding Performance and No Need Gluing Before Production |
| Stable Braking Performance During Your Driving |
| Longer Working Life of Your Brake Pads |
| Safety Guarantee for Your Life |
| Adapt To Different Conditions of Roads |
Technical Specifications of Hook Brake Pads Backing Plates
| 1. Height: 1.70mm±0.3mm |
| 2. Shovel Mouth After Hook Provide Stronger Shear Strength |
| 3. Width of Hooks: 2.0mm±0.2mm |
| 4. Distance Between Hooks Lines: 4.0mm-6.0mm |
| 5. Distance Between Two Hooks: 6.0mm |
ENHANCED BONDING TECHNOLOGY
1. Backing Plates is designed and made by UAI’s latest URT(UAI Mechanical Retention Technology) solution, the surface of friction side is full of hooks, with height over 1.5mm.
2. Hooks will dig into the friction materials, deeply rooted, thus to improve the shear bonding strength greatly.
3. Shear Force up to 45KN, combinding with gluing technology. Very suitable for the high-speed and high-horsepower rally matches.
4. Glue will cover the full surface of backing plates, greatly improving the bonding strength between the friction material and the steel back
URT Zinc Electroplated Backing Plates VS NRS Backing Plates
SUPERIOR BACKING PLATES CRAFTSMANSHIP
1. Using high-quality Q235B carbon steel, with high yield points at 235MPa, no possible to bend during the braking.、
2. Thickness is uniform, flatness is controlled within 0.1-0.2mm;
3. Quality is stable and consistent
4. Molds are manufactured according to the FMSI standard drawings;
5.Strictly produced, accurate size to match for the OE brake capilers and brake discs;
6. Perfectly fit in the caliper, thus reduce the noise caused by friction with the caliper accessories during braking.
Workshop of Brake Pads Hook Backing Plates
PACKAGE AND DELIVERY
